Glazing & Restoration
The Coldglaze PRO 2 System is used to glaze, reglaze and repaint china, ceramic, pottery and other materials without the use of heat. This enables Coldglaze to restore items which may not take well to being fired, such as pieces which have undergone repair or restoration using adhesives.
Several products make up the Coldglaze PRO 2 System. These are combined to create the optimum reglazing or repainting application. As a result, the System is trusted by museums, curators and restoration experts worldwide for use on priceless items and artefacts.
Coldglaze Clear Gloss is a two-part, water-resistant, very tough glaze with excellent non-yellowing qualities which cures to a smooth, hard finish. It offers high strength surface adhesion and has been tested for 20 cycles in a dishwasher at 60°C without signs of deterioration.
For repainting, Coldglaze Gloss can be mixed with pigments or oil colours and applied via paintbrush or airbrush. Adding Titanium Dioxide White Pigment will colour the gloss white rather than the standard clear finish.
When reglazing, Coldglaze is normally applied via airbrush. When airbrushing, PT146 Thinners must be added to the Gloss to thin it suitably. Lowering the viscosity of Coldglaze with Thinners can also help make application via paintbrush easier.
The use of Retarder is highly recommended to increase the cure time of Coldglaze. A longer cure gives the glaze more time to flatten and adhere to ceramic, china or pottery. This improves adhesion, avoids cobwebbing and leads to a higher overall quality of finish. When Coldglaze is applied by airbrush, introducing Retarder to the mix reduces overspray and the cotton wool effect from the airbrush.
For more detailed instructions on how to use Coldglaze PRO 2 and examples of what the System is capable of, please see our Showcase article on How to glaze china, ceramic and pottery like a pro.
We also offer Chinaglaze Low Temperature Glaze as an alternative to Coldglaze PRO 2. Chinaglaze is fast working, requiring only 30 minutes to fire items at around 80°C (176°F). It produces a hard, smooth finish with high strength surface adhesion. HP733 Thinners can be mixed with Chinaglaze to lower the viscosity and it also accepts Titanium Dioxide White to colour the glaze.
Please note that some products in the Coldglaze PRO 2 and Chinaglaze ranges are classed as hazardous. As a result, they may be subject to additional costs when being shipped outside the United Kingdom. If you attempt to place an order but no shipping cost is available, then please contact SylCreate and we will be able to advise.
Showing all 6 results
-
Coldglaze PRO 2 Clear Gloss 1.25l Kit
Clear gloss trusted by professional restorers and curators for reglazing and repainting china and ceramic without the use of heat
-
PT146 Thinners Coldglaze PRO 2
Thinners are added to Coldglaze PRO 2 during mixing to thin the gloss for easier application, especially via airbrushing
-
Retarder 500ml Coldglaze PRO 2
Retarder increases Coldglaze cure time, improving surface adhesion to create a better finish. It also reduces overspray when airbrushing
-
Chinaglaze 1l Low Temperature Clear Glaze
Fast working, perfectly clear glaze which is fired for just 30 minutes at 80°C to create a hard gloss finish with high strength surface adhesion
-
HP733 Thinners 1l Chinaglaze
Thinners for use with Chinaglaze Low Temperature Glaze which thin the gloss for easier application, especially via airbrushing
-
Titanium Dioxide White Pigment 250g
Titanium Dioxide is added to Coldglaze and Chinaglaze during the mixing process to create a white glaze rather than clear
Showing all 6 results