Green Stuff Stick, Magic Sculp 250g and Geomfix Original 250g in one Kit at a discounted price compared with buying putties separately
380 Moulding Rubber, G26 Resin, Release Agent and accessories for making reusable silicone moulds and creating resin copies of parts
4-Way Flexi-File and 50ml Micro Abrasive Gloss Liquid Set for polishing materials to a high quality, ultra smooth, wet look finish
Pale Gold is a paler, darker paint which has a hint of a copper
European Gold is a pale gold paint, the lightest shade available in the Sylmasta Ultimate Gold range
English Gold is a light gold paint which has slightly more yellow than European Gold
Antique Gold is a rich gold paint which is the darkest in the Ultimate Gold range
Crystal clear epoxy adhesive with exceptional non-yellowing qualities which cures totally transparent to repair and bond glass and ceramic
Clear gloss trusted by professional restorers and curators for reglazing and repainting china and ceramic without the use of heat
Versatile Kit which removes minor damage and restores optical clarity to areas of acrylic and plastic up to 3 square metres
Epoxy adhesive which cures in five minutes, creating high-strength bonds between all materials in repair and model making applications
The XL Putty Kit contains double the amount of Green Stuff, Magic Sculp and Geomfix Original for an even greater cost saving
Thinners are added to Coldglaze PRO 2 during mixing to thin the gloss for easier application, especially via airbrushing
Reusable pads with great flexibility available in nine different grades or as a complete set for polishing small areas and curved surfaces
All-purpose silicone moulding rubber with high tear strength for creating dimensionally stable, reusable moulds of original parts
Grey setting epoxy adhesive with a five minute cure time specifically formulated for bonding metals and other rigid materials
Two-part modelling putty which sets harder than other putties. Its tough surface preserves fine details and it is easy to shape
Retarder increases Coldglaze cure time, improving surface adhesion to create a better finish. It also reduces overspray when airbrushing
Liquid which removes residual fine surface scratches and polishes to a very high gloss, creating an ultra-smooth, shiny mirror finish
Mould Release Agent is used to prevent silicone moulding rubber from sticking to itself during the making of split two-part moulds
Pre-formatted stick of Geomfix Original which removes the need to measure out resin and hardener - just cut, mix, use
Applicator Gun used to dispense 50ml cartridges of Sylmasta Rapid 5 Minute and Metal Bond Epoxy Adhesives
Grade 60/40 Lead-Bismuth Casting Alloy - 1.2kg
File with two grades of abrasive - one per side - for use on metal. Three different files are available for deburring, smoothing and polishing
Sculpting putty which sets to an ultra smooth finish. Its soft consistency prevent it shrinking or cracking even when formed in large structures
Putty available in 23 colours matching Swarovski crystals for modelling, jewellery making, antique restoration and wood turning
All three grades of Sylmasta Superglue with Ultra-Fine Nozzles in one Kit at a reduced cost compared to buying separately
Medium viscosity polyurethane resin with a longer pot life of 3-4 minutes for casting of larger items with sections 0.5mm thick and upwards
File with three grades of abrasives - rough, medium and smooth - used to polish materials towards a smooth final finish
Sticky putty supplied in a 90cm Reel. Has a smooth cut used for highly detailed pieces like fantasy wargame and for military insignia
Kit containing all three grades of Sylmasta Superglue, Activator and Ultra-Fine Nozzles at a reduced cost compared to buying separately
Low viscosity polyurethane casting resin with a pot life of 150 seconds for casting of smaller items with sections thinner than 0.5mm
File with four grades of abrasives for working through the entire polishing process from removal of material to ultra-smooth final finish
Green Stuff supplied with the resin and hardener as two separate sticks, allowing more control over mix ratios and the putty's properties
High viscosity superglue with cure of 10 to 45 seconds on non-absorbent materials, allowing adjustment of parts before permanent bonds form
Polyurethane casting resin which cures straight to white. Has a 150 second pot life but a lower viscosity compared to standard G27
Fast-setting putty formulated to match the colour and texture of wood used for repair, restoration and carving of wood-like models
Multipurpose, medium viscosity superglue which cures in seconds to all materials in model making, repair, restoration and craft applications
Abrasive sheets in six different grades for finishing plastics, soft metal, fibreglass, polymers, soft woods, marble, coatings and more
Low viscosity, water-thin superglue which penetrates porous surfaces and flows into joints, cracks and small areas not easily accessed
All-purpose epoxy repair putty which sets dark yellow. It is soft to carve and used for scale model making and general DIY repairs
Fast working, perfectly clear glaze which is fired for just 30 minutes at 80°C to create a hard gloss finish with high strength surface adhesion
12ml one-piece syringe with a curved tip which offers accurate dispensing of casting resins into the silicone rubber mould
Precision nozzles which fit 20g bottles of Sylmasta Superglue, dispensing beads as small as 0.5mm for neat, accurate glue lines
Hard wearing epoxy putty which is terracotta coloured to repair urns, pots, statuettes, brickwork and other ornaments found in exterior settings
Thinners for use with Chinaglaze Low Temperature Glaze which thin the gloss for easier application, especially via airbrushing
Stiffer backed abrasive sheets available in 13 different grades which finish and polish all types of metals and hard woods
Titanium Dioxide is added to Coldglaze and Chinaglaze during the mixing process to create a white glaze rather than clear
Abrasive sheets containing aluminium oxide crystals in 12 grades for polishing aluminium, ceramics, plastic and other solid surfaces
3ml Polyurethane Pasteur Pipettes marked with 0.5ml graduations for dispensing activators, resins, colours and other liquids
Activator for speeding up the curing time of Sylmasta Superglues sold in a 50ml bottle with brush for accurate application to small parts
Putty designed for applications which do not require great detailing, such as taxidermy and filler repair of ornaments and ceramics
Reusable mixing cups with accurately marked 2:1, 3:1, 4:1 and 5:1 ratios for effortlessly mixing moulding rubbers and resins
AO Micro-Mesh on both sides of a reusable pad which conforms to surfaces for spot repairs of aluminium, plastic and ceramic
Activator in a 200ml aerosol sprayed over surfaces and larger parts before application of Sylmasta Superglues to speed up cure time
White setting putty which is extra-fine for detailed work such as the repair of antiques, objects of art, china and models
Large sized wooden stirrers for easy mixing and application of liquid silicone moulding rubbers and casting resins
Putty which sets to black for creating darker models, jewellery making and repairing damage without the need for painting afterwards
Super fast, very strong and transparent epoxy adhesive which cures in only two minutes for rapid bonding of smaller parts
Blue-setting putty developed for woodturning, marbling, making vibrant pieces of jewellery and general sculpting applications
Plasticine is used to fill part of a mould box during the creation of the first half of a split two-part silicone rubber mould
Crystal clear, high strength epoxy adhesive which bonds in five minutes to repair pottery, porcelain, glass, ceramic and other materials
Conditioner containing carnauba wax and specialised abrasives for polishing vinyl surfaces and making them more supple
Ultra strong epoxy adhesive with a 90 minute cure for complex bonding and repair tasks where time and care need to be taken
Cream which removes static charges from newly polished plastic and other surfaces to prevent dust and dirt particles sticking after finishing
The Dual-Barrel Cartridge extrudes both parts of UHU Endfest in perfectly measured ratios for a more user-friendly application
Specialist plastic glue for assembling polystyrene and other plastic materials with a fine needle-shaped nozzle for precise application
High grade casting pewter which is lead and nickel free and suitable for every kind of scale model and jewellery making project
Casting alloy for the manufacture of model kits which gives excellent reproduction of detail and a good surface finish
Lead-Bismuth Alloy with a higher melting point and density offering maximum malleability for casting figures and jewellery components